Esun Flex (0.5KG)

Description

Esun Flex (0.5KG)

High flex, doesn’t break after multiple fold. Tougher with better tear resistance.

Features

• High Precision
• High hardness
• Shore A: 85-90
• Density: 1.13 – 1.15 g/m3
• Viscosity: 1200 mPa at 25C
• Wavelength: 405nm
• Shrinkage: 6,9%
• Tensile strength: 6-8 MPa
• Elongation at break: 100-150%
• Tearing Strength: 390-320 kN-m
• Flexural strenght: 77 MPa
• Flexural modulus: 2350 MPa
• IZOD Impact strenght: 44 J/m
• Color: Orange

Contents

• Bottle: 500Gr
• Color: Yellow transparant

How to use

• Suggest printing temperature is 25-35℃.
• When printing in low temperature it need heating ( 40-60℃) before using
• Lift height > 8mm.
• Lift speed ~ 60 mm/min.
• The waiting time between two exposure > 10s
• Put printed model in water for post curing. Use direct sunlight for 30 min, or UV LED light for 15mins .

Notes & Warnings

• Always wear personal protection (gloves, glasses) when handling resin
• Use your resin 3D printer under well ventilated circumstances
• Suggested safety equipment: gloves, mask, glasses, and lab coat
• Do not expose UV resin to sunlight or indoor light containing UV
• In case you consume UV resin, get medical advise
• In case resin get’s in your eye, wash your eyes with water and get medical advise
• Resin can cause skin irritation, always wear gloves when handling
• Please keep UV resin away from kids
• Keep resin at room temperature(15 – 35 OC) and dry condition.