Description
ApplyLabWork DLP Modeling Gray captures the finest print detail, dimensionally accurate, matte and smooth finish – easy on the eyes, excellent for dental applications. Product features
- Calibrated on SprintRay‘s D75, S100 & Pro95 printers and other open source DLP Printers
- RayWare material selection: SprintRay Try In
- Not suitable for SLA Laser type printers
- Tensile strength (50-58Mpa) / Elongation (2-3%)
- VOC Free, Minimum odor
- Note: For other open source DLP printers, please refer to Calibration Tutorial
Modeling Gray Specifications
| Color: | White |
|---|---|
| Size: | 1 Liter |
| Material: | Acrylate-based Polymer for 3D Printing |
| Tensile(MPa): | 50-58 |
| Elongation(%): | 2-3 |
| Impact(J/m): | 21-25 |
| Hardness(Shore): | 87-89 |
| Flexural Strength(MPa): | 100-105 |
| Flexure Modulus (MPa): | 1770-1930 |
| HDT(°F/°C): | 143,1℉/61,7℃ |
| Tear Strength(kN/m): | – |
| Compression(%): | – |
| Viscosity at 77°F/25°C: | 300-360 |
Notes & Warnings
This resin is not compatible with SLA 3D Printers
Reviews
There are no reviews yet.