Description
Laser Clear Resin is great for models that require translucency and clarity. It produces precise, strong but non-brittle models. Very minimum yellowing after post curing.
Modeling Clear Features
- For SLA Printers / Laser-based printers, calibrated on Formlabs Form2 & Form 3
- Formlabs VAT friendly (extensively tested)
- Clear material selection
- High tensile strength (53-63Mpa) with balanced elongation (1-4%)
- VOC Free, very low odor
- For detailed print instructions, please refer to Printing Tips
Modeling Gray Specifications
| Color: | Clear |
|---|---|
| Size: | 1 Liter |
| Material: | Acrylate-based Polymer for 3D Printing |
| Tensile(MPa): | 53-63 |
| Elongation(%): | 1-4 |
| Impact(J/m): | 17-29 |
| Hardness(Shore): | 85-8*D |
| Flexural Strength(MPa): | 89-105 |
| Flexure Modulus (MPa): | 1600-2200 |
| HDT(°F/°C): | -/77℃ |
| Tear Strength(kN/m): | – |
| Compression(%): | – |
| Viscosity at 77°F/25°C: | 1100-1300 |
Notes & Warnings
This resin has not been tested on the following printers: AnyCubic Photon, Wanhao D7, Xayav Model V, Titan, Phrozen.
FormCure 60℃, 30min
Reviews
There are no reviews yet.