Phrozen Flex – Beige (0.5KG)

Phrozen Flex Beige headlines

• Volume: 500g per bottle
• Layer Height / Parameter: 10 sec @ 50 um, Delay 3
• Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
• Z Resolution (Layer Height): 30-100um
• Property:  High hardness, toughness and resolution.
• Suitable for: All LCD 3D Printer
• Application: General modeling & prototyping

Specifications

• Viscosity: 545 cps (25C)
• Density: 1.19 g / cm3
• Tensile Stress (Break): 40 MPa
• Elongation: 50-60%
• Tensile Modulus: 192 MPa
• Hardness: Shore 65D
• Heat Deflection Temperature @0.45MPa: 100C

Operating instructions

• Suggest to use our resin and printer indoor under ventilated situation.
• Avoid exposure to sunlight and indoor luminescence.
• Please preserve our resin in closed opaque bottle in avoid of exposure to air.
• Do not mix used and non-used resin together.
• Please keep the resin away from kids.
• Do not dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Rules

• Do not eat and swallow the resin. Go to hospital if necessary.
• Wear goggles in avoid of eye contact to resin. Wash your eyes by water and go to hospital if necessary.
• Resin might cause slight irritation to skin. Wear gloves when handling. Stop using it if allergy occurred.
• Resin is with slight odor. We strongly suggest you to use it under ventilated condition.
• Suggested safety equipment: gloves, mask, goggles, and lab coat.
• Keep resin in room temperature(15 – 35 OC) and dry condition.

Support

• Phrozen FAQ