Finally available in Europe. ApplyLabWork Resin is a series of SLA & Formlabs compatible resin series. These resins are tuned to behave like regular Form1 and Form2 resins. Extensively tested on Form2 and Formlabs resin vats.
ApplyLabWork Resin Specifications
|
MODELING
BEIGE V1 |
MODELING
BLACK |
MODELING PLUS
OLIVE GRAY |
FLEX
Metallic |
|
| Group | ||||
|---|---|---|---|---|
| Tensile(Mpa) | 50-55 | 50-57 | 38-40 | 2-3 |
| Elongation(%) | 2-6 | 3-8 | 25-35 | 105-120 |
| Impact(J/m) | 24-26 | 24-26 | 29-35 | N/A |
| Hardness(Shore) | 83-85D | 83-85D | 83-85D | 82-85A |
| Flexiral Strength(Mpa) | 80-85 | 76-80 | 53-57 | – |
| HDT(°F/°C) | 119/48.4 | 117/47.5 | 113/45.0 | – |
| Tear Strength(kN/m) | – | – | – | 11-15 |
| Compression(%) | – | – | – | 2-2.5 |
| Viscosity(cp) | 1300~1400 cP | 1300~1500 cP | 1000~1200 cP | 1300~1500 cP |
|
MODELING
GRAY |
MODELING
TAN |
MODELING
BEIGE |
|
| Group | |||
|---|---|---|---|
| Tensile(Mpa) | 53±1.5 | 42±1.7 | 45±2.4 |
| Elongation(%) | 3±1.7 | 4±2.2 | 3±1.8 |
| Impact(J/m) | 16±0.4 | 16±1 | 14±1.1 |
| Hardness(Shore) | 86±1.1 | 85±1.3 | 84±1.1 |
| Flexiral Strength(Mpa) | 92±3 | 81±2.3 | 76±1.3 |
| HDT(°F/°C) | 135/57 | 131/55 | 129/53 |
| Tear Strength(kN/m) | – | – | – |
| Compression(%) | – | – | – |
| Viscosity(cp) | 1062~1275 cP | 975~1175 cP | 1025~1200 cP |
